Bolt IoT

Molecular Diagnostics Made Accessible with IoT Temperature and Humidity Monitoring for Molbio Diagnostics.

Written by Manasi S J | May 31, 2022 1:14:34 PM

 

Introduction:

Molecular diagnostics play a crucial role in healthcare, but traditionally, it has been confined to central laboratories that require patients and samples to travel long distances. As a result, this has led to logistical and technical challenges, increased costs, and longer turnaround times. Furthermore, the accuracy of test results and the impact of interventions on treatment outcomes have been questioned, leading to low acceptance of these dependable and cutting-edge technologies that have the potential to save millions of lives, reduce disease burden and antimicrobial resistance, and alleviate suffering, especially in Low and Middle-Income Countries where timely access to adequate diagnostics is a significant healthcare demand.

 

To overcome these challenges, Molbio Diagnostics has developed a solution, the Truelab Real Time quantitative micro PCR system, which decentralizes access to molecular diagnostics and brings PCR technology to the point of care. 

 

This has democratized access to molecular diagnostics by enabling them to be performed in laboratory and non-laboratory settings, primary centers, in the field, near patients, and essentially at all levels of healthcare.

However, to ensure the accuracy of test results, it is essential to maintain the temperature and humidity thresholds, which can be achieved by digital monitoring. 

 

Molbio Diagnostics has implemented Bolt IoT's Blake Temperature and Humidity Monitoring solution, an automated internet-connected device that guarantees precise and efficient monitoring.

 

In summary, molecular diagnostics are essential to healthcare, and Molbio Diagnostics' Truelab Real Time quantitative micro PCR system has revolutionized access to these technologies by bringing them closer to patients. With the implementation of Bolt IoT's Blake Temperature and Humidity Monitoring solution, Molbio Diagnostics has ensured accurate and efficient monitoring of test results.

Molbio Diagnostics' Truelab Real Time quantitative micro PCR system:

The Truelab Real-Time quantitative micro PCR system by Molbio Diagnostics decentralizes and democratizes access to molecular diagnostics by: 

  1. Bringing PCR technology to the point-of-care in all laboratory and non-laboratory settings
  2. Primary health centers, in the field, near patients, and essentially at all levels of healthcare.
The portable technology allows for early and accurate diagnosis as well as the initiation of appropriate therapy directly at the site of contact.

 

This quick and portable technology enables early and accurate diagnosis, as well as the initiation of appropriate therapy directly at the site of contact. With the capacity to function even in Primary Health Centers and wireless data transfer capabilities, this game-changing technology ushers in a paradigm shift in the global fight against infectious disease control and management.

 

Molbio Diagnostics tests almost all diseases, such as H1N1, TB, and Covid, among others. The major ones are Covid and TB. The company's Covid test products cover 60 percent of its portfolio.

 

Bolt IoT's Blake Temperature and Humidity Monitoring solution:

People often stick to old methods and means because of the ease and comfort they provide. However, innovation is based on the idea of making processes and lives better and easier. It just requires taking one step forward to embrace innovation.

 

Bolt IoT is a company that aims to make monitoring easier, more accurate, and efficient. The Blake Temperature and Humidity Monitoring solution is an automated internet-connected device.

 

Molbio Diagnostics' main reason for looking for a monitoring device was to shift to a digital system, and Blake satisfied this requirement.

 

Blake is an automated internet-connected device that has made temperature and humidity monitoring easier, more accurate, and efficient

 

It is a perfect blend of innovation and authenticity, offering : 

  1. Cloud storage
  2. An alert system
  3. Quality assurance
  4. Accuracy
  5. Quick customer service

The device is designed to make monitoring of temperature and humidity Wi-Fi-based.

Temperature and Humidity Monitoring:

One of the challenges faced by Molbio Diagnostics is maintaining proper temperature and humidity in their laboratory. Improper temperature and humidity control can lead to:

  1. Contamination of specimens
  2. Static buildup on instruments and equipment 
  3. Problematic uncertainty ratios regarding the efficacy of results
  4. Non-adherence to government regulations rendering the batch ineffective
Digital monitoring is necessary to increase accuracy, and Molbio Diagnostics turned to Bolt IoT's Blake Temperature and Humidity Monitoring solution.

 

Maintaining the thresholds of temperature and humidity is essential not only due to government regulations but also to deliver accurate products and results to the end consumer. As a diagnostics company, Molbio Diagnostics needs to ensure temperature and humidity monitoring to avoid mistakes in the readings. The absence of digital monitoring makes it difficult to obtain accurate readings, which is why a digital monitoring system was necessary to increase accuracy.

Temperature and humidity are two factors that need to be maintained to:

  1. Avoid scrutiny & contamination
  2. Ensure personnel's comfort
  3. Maintain a positive safety culture

While all of the above points are generally of concern to a pharmaceutical company, Molbio Diagnostics is most concerned about the uncertainty in the results due to a noticeable gap between readings.

As a diagnostics company, temperature and humidity monitoring is crucial to avoid errors in the readings. The absence of digital monitoring makes it difficult to obtain accurate readings, as evidenced by the different values obtained when the same parameters were monitored by the calibration party. 

It is crucial that the company maintains these thresholds not only due to government regulations but also to deliver accurate products and results to the end consumer. Any anomalies in the medical sector can compromise the customer's health.

Benefits of Blake:

Blake by Bolt IoT is an innovative automated device that is : 

  1. Internet-connected 
  2. Designed to provide cloud storage
  3. Accurate quality assurance
  4. Quick customer service
  5. An alert system 

Its Wi-Fi-based remote monitoring eliminates the need for manual resources, making it a valuable asset to any company. 

 

Molbio Diagnostics recognized the advantages of Blake's features and appreciated the alert system for threshold crossing and power failure, remote monitoring, and the absence of manual resources.

 

However, the company saw the advantages of Blake beyond its features, with customer service being of prime importance

  1. The prompt response from Bolt IoT to any query
  2. Constant upscaling of features to keep up with the times
  3. Hassle-free installation 

These key terms helped build a trustworthy business relationship. 

  1. The cloud storage
  2. Alert system
  3. Quality assurance accuracy
  4. Quick customer service 

These features were crucial in achieving better results for Molbio Diagnostics. 

As a digital device, Blake is designed to make temperature and humidity monitoring wifi-based, providing a complete blend of innovation and authenticity in the process. 

The advantages of Blake may vary from company to company, but Molbio Diagnostics listed the key advantages of the device:

  1. An alert system for threshold crossing and power failure
  2. Remote monitoring 
  3. No need for manual resources

Overall, Blake by Bolt IoT is a valuable tool that can enhance any company's operations, providing accurate and reliable monitoring while also offering exceptional customer service.

Conclusion:

Innovation is critical in today's business world, and staying ahead of the competition requires a constant search for new and better ways of doing things.

 

One example of such innovation is the Blake Temperature and Humidity Monitoring solution by Bolt IoT, which addresses the persistent monitoring challenges faced by the pharmaceutical industry. 

 

This IoT product not only provides cloud storage for easy data analysis but is also affordably priced, making it an attractive solution. 

Moreover, Bolt IoT's excellent customer service is an added advantage for clients like Molbio Diagnostics

By adopting innovative solutions like Blake, Molbio Diagnostics can enhance its operations and potentially achieve success in a highly competitive market. 

 

The product's cloud-based storage and analysis capabilities can significantly improve data accuracy, which is vital in the diagnostics industry

 

With its superior quality, competitive pricing, and consistent upscaling of its services, Blake has become a desirable product for many companies, including Molbio Diagnostics

 

For more information, contact us via below form